HCT690T Galvanized Steel Strip
HCT690T steel is a high-strength hot-rolled steel, with EN 10346:2015 plus AC:2016 as its execution standard. It is suitable for stamping and forming structural components.
Beskrivelse
HCT690T steel is a high-strength hot-rolled steel, with EN 10346:2015 plus AC:2016 as its execution standard. It is suitable for stamping and forming structural components.
The chemical composition range of this steel is as follows: Carbon (C) Less than or equal to {{0}}.24, Silicon (Si) Less than or equal to 0.80, Manganese (Mn) Less than or equal to 2.5{{10}}, Phosphorus (P) Less than or equal to 0.025, Sulfur (S) Less than or equal to 0.{{20}}05, Aluminum (Al) Greater than or equal to 0.015, Chromium (Cr) Less than or equal to 0.50, Copper (Cu) Less than or equal to 0.30, Molybdenum (Mo) Less than or equal to 0.10, Nickel (Ni) Less than or equal to 0.50, Titanium (Ti) Less than or equal to 0.15, Niobium (Nb) Less than or equal to 0.10.
The tensile strength of HCT690T steel ranges from 400 to 520MPa, and the yield strength is greater than or equal to 690MPa. The elongation at fracture is greater than 23 percent .
This steel is suitable for stamping and forming structural components, such as automotive doors, engine hoods and blades, and compressor tanks. Its typical state is hot-rolled.
The disadvantage of this steel is that its deformation capacity is limited compared to other high-strength steels, and its strength and hardness are relatively low.
The most common form of HCT690T steel is hot-rolled steel plate.
In different countries, this steel has different grade designations. In China, the grade designation is QSTE690TM, which is equivalent to international standard S690QL; in the United States, the grade designation is ASTM A1011 HSLAS-F Grade 80; in Europe, the grade designation is EN 10346:2015 plus AC:2016 HCT690T.
In conclusion, HCT690T steel is a high-strength hot-rolled steel, suitable for stamping and forming structural components. It has good formability and weldability, as well as good quenching and tempering performance. Its disadvantage is that its deformation capacity is limited compared to other high-strength steels. The most common form is hot-rolled steel plate. It has different grade designations in different countries.
|
|
|
|
|
|
|
|
HCT450X ,1.0937 ,HCT490X ,HCT590X ,1.0995, HCT780X ,1.0943 ,HCT980X ,1.0944 , HCT980XG ,1.0997, HCT690T ,1.0947,HCT780T ,1.0948,HCT600C ,1.0953 ,HCT780C , 1.0954,HCT980C , 1.0955 |
|
|
|
|
|
|
|
|
7-15 days or according to the order quantity or negotiation |
|
|
|
|
|
|
|
|






- We are convinced that we will be able to get your support and trust with our high quality HCT690T and strict quality management system.
- We are a Chinese factory specializing in the production of high-quality Cold-rolled Multiphase Steel products.
- With our expertise in Cold-rolled Multiphase Steel, we deliver the best quality products to our clients.
Populære tags: hct690t galvanized steel strip, China hct690t galvanized steel strip suppliers, factory







